Product Description

Model NO.: KZ-1000


Certification: CE, ISO


Brand: Sunstrike


Specification: 1.6x1.8x9.6


HS Code: 8417809090




Type: Air Flow


Structure: Horizontal Type


Trademark: Sunstrike


Origin: Zhengzhou



Best Selling Coconut Husk Carbonization Furnace Made in China

Coconut Husk Carbonization Furnace Advantage:

1.Middle part of the furnace is the hot spots, the carbonizer has simple structure, convenient operation.

2.This new type have sharply reduced the mechanical transmission parts, more reasonable design, reduce 80% of the failure rate.

3.Feed particle size increase more than 20-30mm,reach to 50mm.

4.Rotary design the carbonizer drum continuously,avoid from the lack of heating the certain point(vertical type-the carbonzing tube will bend and leaked at last), extend the lifetime of the carbonizer greatly.

5.The output capacity,Carbonized uniformity and the the quality of the charcoal are improved greatly.



Coconut Husk Carbonization Furnace Working Principle:

This carbonization furnace is fueled by the syngas(carbon monoxide, methane, ethane etc.) from the furnace itself.The biomass raw material will produce plenty of combustible gas during the pyrolysis of the carbonzation process,the syngas will became pure combustible gas after wood tar, wood vinegar Other impurities was isolated by the filter and purification system (gas cleaner / dust-removal / purify tank / scrubber)

The gasifier is used to preheating the carbonizer,when the temperature reach to 300ºC,the feeding screw conveyor start to feeding raw material into the carbonizer.the material will produce fuel gas,which will be collected and used to heating the carbonizer after cleaning by the filter and purification system. The temperature of carbonizer will control at 600 degrees Celsius.

When the carbonizer can produce enough flue gas and reach to self sufficient combustion, close the gasifier and open All the flue gas valve of the carbonizer gradually, finally achieve flammable gas self-sufficiency carbonization.

Coconut Husk Carbonization Furnace Process Description:

The dried biomass raw materials is feeding into the gasifier by the screw conveyor, gasification of carbon powder from the bottom of the conveyor to the carbon powder storage, centralized storage and sales;

After spraying, cooling, cleaning,the flue gas produced by gasification furnace will be transfer to self combustion burner for carbon machine for heating furnace;

Start feeding the carbonization machine when internal temperature rose to a certain degree, the raw material inside the carbonization furnace began to produce fuel gas which will be transfer to the burner heating the carbonizer by the draft fan after collected and cleaning by the purification system.

Gasification furnace stop working until shut down, using spontaneous combustion flue gas only;

The finished product after cooling will be packaged,stored and sold;

Then the whole system can keep feeding raw material and discharging final charcoal, enter the process of continuous carbonization stage; the spray water cooling water from purification system and cooling system can be recycled.

Coconut Husk Carbonization Furnace Technical Parameter:

Specification	Model	Capacity	Main Motor Power	Overall Dimension
S800	KZ-0.3	300Kg/h	11Kw/h	1.0×1.7×8
S1000	KZ-0.5	500Kg/h	15Kw/h	1.3×1.9×8.5
S1300	KZ-1.2	1200Kg/h	18.5Kw/h	1.6×2.2×8.5
S1600	KZ-2	2000Kg/h	30Kw/h	2.2×2.8×8.5
S2000	KZ-3	3000Kg/h	55Kw/h	3.0×3.3×8.5

Contact us if you need more details on Best Selling Coconut Husk Carbonization Furnace Made in China. We are ready to answer your questions on packaging, logistics, certification or any other aspects about China High Quality Coconut Husk Carbonization Furnace、China Coconut Husk Carbonization Furnace. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Wood Pellet Mill > Sawdust Carbonization Furnace